문제 : 새 라우터 (TP-Link AX11000)를 변경 한 후 Windows PC에서 Linux Mint 20.1 PC에 액세스 할 수 없음
라우터 : TP-Link AX11000
컴퓨터 1 : Windows 10 PC
머신 2 : Linux Mint 20.1 PC
새 라우터로 변경하고 모든 장치에 새 IP가 할당 될 때까지 Windows 10 PC에서 Linux Mint 20.1 PC로 winscp / nomachine / ssh를 사용할 수있었습니다. 문제의 원인이 다음과 같은지 잘 모르겠습니다.
sudo ufw disable
하고 아래에 언급 된 방법으로 연결을 시도했는데 작동하지 않습니다. 따라서 방화벽이 문제라고 생각하지 않습니다.)WinSCP 오류 :
Network error: Connection to "192.168.0.231" timed out
NoMachine 오류 :
A connection timeout has occurred while trying to connect to '192.168.0.231' on port '4000'. The issue could either be caused by a networking problem, by a firewall or NAT blocking incoming traffic or by a wrong server address. Please verify your configuration and try again.
SSH 오류 :
# standard ssh to my linux mint don't work as expected
$ ssh -v [email protected]
OpenSSH_8.2p1 Ubuntu-4ubuntu0.1, OpenSSL 1.1.1f 31 Mar 2020
debug1: Reading configuration data /home/USER/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: include /etc/ssh/ssh_config.d/*.conf matched no files
debug1: /etc/ssh/ssh_config line 21: Applying options for *
debug1: Connecting to 192.168.0.231 [192.168.0.231] port 22.
debug1: connect to address 192.168.0.231 port 22: No route to host
ssh: connect to host 192.168.0.231 port 22: No route to host
# ping the IP address to ensure linux mint pc is up (it's because I am looking at the mint pc), from my Windows to my Linux
ping 192.168.0.231
PING 192.168.0.231 (192.168.0.231) 56(84) bytes of data.
From 192.168.0.194 icmp_seq=7 Destination Host Unreachable
From 192.168.0.194 icmp_seq=10 Destination Host Unreachable
From 192.168.0.194 icmp_seq=13 Destination Host Unreachable
From 192.168.0.194 icmp_seq=16 Destination Host Unreachable
From 192.168.0.194 icmp_seq=19 Destination Host Unreachable
From 192.168.0.194 icmp_seq=22 Destination Host Unreachable
From 192.168.0.194 icmp_seq=25 Destination Host Unreachable
^C
--- 192.168.0.231 ping statistics ---
25 packets transmitted, 0 received, +7 errors, 100% packet loss, time 24778ms
IP 정보 :
$ sudo netstat -anutp | grep :22
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 64417/sshd: /usr/sb
tcp6 0 0 :::22 :::* LISTEN 64417/sshd: /usr/sb
$ ip addr
...
inet 192.168.0.231/24 brd 192.168.0.255 scope global dynamic noprefixroute wlp59s0
...
$ hostname -I
192.168.0.231
$ ip r
192.168.0.0/24 dev wlp59s0 proto kernel scope link src 192.168.0.231 metric 600
라우터 설정 방법 : https://www.tp-link.com/us/user-guides/archer-ax11000_v1/chapter-4-set-up-internet-connection#ug-sub-title-1
AX11000 시스템 진단 출력 :
# Windows 10 PC ping
PING 192.168.0.194 (192.168.0.194): 64 data bytes
Reply from 192.168.0.194: bytes=64 ttl=128 seq=1 time=1.632 ms
Reply from 192.168.0.194: bytes=64 ttl=128 seq=2 time=1.620 ms
Reply from 192.168.0.194: bytes=64 ttl=128 seq=3 time=1.327 ms
Reply from 192.168.0.194: bytes=64 ttl=128 seq=4 time=1.722 ms
--- Ping Statistic "192.168.0.194" ---
Packets: Sent=4, Received=4, Lost=0 (0.00% loss)
Round-trip min/avg/max = 1.327/1.575/1.722 ms
ping is stopped.
# Windows 10 PC traceroute
traceroute to 192.168.0.194, 5 hops max, 38 byte packets
1 * * *
2 * * *
3 * * *
4 * * *
5 * * *
Trace Complete.
traceroute is stopped.
# Linux Mint 20.1 PC ping
PING 192.168.0.231 (192.168.0.231): 64 data bytes
Reply from 192.168.0.231: bytes=64 ttl=64 seq=1 time=7.350 ms
Reply from 192.168.0.231: bytes=64 ttl=64 seq=2 time=1.145 ms
Reply from 192.168.0.231: bytes=64 ttl=64 seq=3 time=1.307 ms
Reply from 192.168.0.231: bytes=64 ttl=64 seq=4 time=2.178 ms
--- Ping Statistic "192.168.0.231" ---
Packets: Sent=4, Received=4, Lost=0 (0.00% loss)
Round-trip min/avg/max = 1.145/2.995/7.350 ms
ping is stopped.
# Linux Mint 20.1 PC traceroute
traceroute to 192.168.0.231, 5 hops max, 38 byte packets
1 192.168.0.231 (192.168.0.231) 35.597 ms 35.319 ms 1.242 ms
Trace Complete.
traceroute is stopped.
모든 응답 / 포인터 / 도움을 주시면 대단히 감사하겠습니다!
당황 스럽지만 라우터를 다시 시작하면 문제가 사라집니다. 여기에 질문을 게시하기 전에 그렇게했다고 맹세하고 작동하지 않는지 확인합니다.
TP-Link 지원팀에 연락하여 문제를 해결합니다. 다음은 TP-Link AX11000을 사용하고 동일한 문제에 직면 한 경우 확인해야 할 몇 가지 설정입니다.
고급> 무선> 무선 설정
고급> 무선> 추가 설정
AP Isolation
하다 비활성화고급> 시스템> 펌웨어 업그레이드
이러한 설정이 올바른지 확인한 후 라우터를 종료하고 5 분 동안 기다린 후 다시 시작하십시오. 이제 작동합니다. 손가락이 교차합니다.
또한 도움을 주신 @Zina 사용자에게 특별히 감사드립니다.
이 기사는 인터넷에서 수집됩니다. 재 인쇄 할 때 출처를 알려주십시오.
침해가 발생한 경우 연락 주시기 바랍니다[email protected] 삭제
몇 마디 만하겠습니다