정상적으로 Ubuntu 18.04 LTS를 실행하는 랩톱에 Windows 7을 설치 한 후 더 이상 Ubuntu를 부팅 할 수 없습니다. GRUB는 부팅시 나타나지 않았고 Windows가 직접 시작되었습니다.
부팅 복구 도구를 사용한 후 GRUB 메뉴가 다시 나타나지만 Ubuntu를 정상적으로 부팅하려고하면 화면이 검은 색으로 유지되고 왼쪽 상단 모서리에 커서가 깜박입니다.
복구 모드에서 Ubuntu를 부팅하는 것은 항상 같은 지점에서 멈췄습니다.
일부 드라이버를로드하는 것 같습니다. 여기에서 5 분 이상 기다리면 다른 프롬프트가 나타납니다.
Enter를 눌러 시스템을 부팅합니다.를 누르면 Enter복구 모드 메뉴가 실제로 나타납니다.
내가 선택하면 network
여기에, 시스템은 다시 처음이 보여주는 붙어 가져옵니다
부하 커널 모듈을 시작하지 못했습니다 다음이과 :
로드 커널 모듈을 시작하지 못했습니다 - 다시 는 아무것도하지 않는다 곳.
흥미롭게도 Ctrl+를 누르면 c우분투가 부팅되고 WiFi 나 USB가 작동하지 않는 상태 에서 내 사용자 계정에 로그인 할 수 있습니다 .
On a wired network connection it seems to work somehow (but not for everything, Firefox, for example, couldn't load any website) and I was able to run sudo apt-get update
and sudo apt-get upgrade
where it seemed to be able to connect to the servers but didn't change the situation at all.
After reading through this Guy's post who seems to have had a very similar problem, I got the following output for sudo systemctl status systemd-modules-load.service
:
many red lines Too many red lines for my taste, unfortunately, I'm too inexperienced to get what it wants to tell me. Unfortunately, the answer that helped the guy who posted the question above didn't have any healing effect on my system.
This is where I am right now. The simplest thing to do probably would be to reinstall Ubuntu, but I really would like to avoid all the setting-up-new-system stuff. Any Ideas how I can get my Ubuntu installation to boot normally again (with WiFi and USB working)?
Thanks for any advice in advance!
The system hanging is due to problems with your Linux kernel files. It can't find and load the needed drives and is hanging up while trying to find them.
This can be resolved by running these steps:
$ sudo apt install --reinstall linux-image-generic
$ sudo grub-install /dev/sdX
Make the variable X the drive that you want to use for booting. Under normal circumstances this drive is /dev/sda
.
Other important commands to resolve the other errors is to ensure the integrity of your Ubuntu installation with these commands:
$ sudo apt update
$ sudo apt upgrade
$ sudo apt full-upgrade
$ sudo apt autoremove
참고 :
Linux 이미지를 다시 설치하면 발생하던 모듈 오류가 수정되었습니다. 또한 네트워크 드라이버 및 인터넷 연결 문제가 해결되었을 것입니다.
이 기사는 인터넷에서 수집됩니다. 재 인쇄 할 때 출처를 알려주십시오.
침해가 발생한 경우 연락 주시기 바랍니다[email protected] 삭제
몇 마디 만하겠습니다