제 시스템은 현재 매우 느립니다. 왜 그런지 낚시를하고 있습니다 ..
시스템 : W10x64 Pro, i5-4460 CPU @ 3.2GHz, 8GB PC3-12800 @ 1600MHz, 500GB SATA HDD.
디스크 C : 여유 공간이 10 % 미만이며 작업 관리자에서 볼 때 디스크 사용량이 주요 문제입니다. 때때로 컴퓨터가 멈춰 버릴 때까지 10-15 분 정도 기다려야합니다.
방금 16GB의 커밋 된 메모리가 있다는 것을 알았지 만 이유를 모르겠습니다. 시스템이 항상 HDD에 데이터를 쓰도록 강요당하는 것일까 요? 이것이 그렇게 느린 이유입니까?
작업 관리자의 이미지 :
편집하다. 내 페이징 파일은 커밋 된 메모리 크기를 설명하는 8GB입니다.
Should I disable it and see if the RAM is enough for my usage .. I need a solution on how to get the system to work normally.
You do not have 16 GB of committed memory. Your task manager screen snap shows that you have 2.2 GB of committed memory, aka "commit charge", with a commit limit of 16 GB.
Committed memory is virtual address space, specifically process-private virtual address space, and it is pageable. So n GB of commit charge is not necessarily using n GB of RAM. And on the other hand, there are other uses of RAM besides committed memory.
See the numbers on your first Task Manager screen snapshot under "Committed"? The first shows how much is currently committed (the "commit charge") and the second shows the commit limit. (Running into the commit limit brings you the "Windows is low on memory" pop-up.)
The graph on the memory page shows physical (RAM) memory usage and it shows only 30% of RAM in use. So disabling your page file will not address your performance problems.
커밋 된 메모리는 프로세스가 할당 할 때 생성됩니다. 커밋 요금에는 문제가 없지만 참조 용으로 추가하겠습니다. 각 프로세스의 기여도는 TM의 "세부 사항"탭, "커밋 크기"열에 표시됩니다 (기본적으로 표시되지 않음). 추가해야 할 가능성이 높습니다). 페이징 및 비 페이징 풀도 시스템 전체 커밋 요금의 일부입니다.
작업 관리자의 또 다른보기 (우리가 볼 수 없음)는 디스크 0이 대부분의 시간 동안 사용 중임을 보여줍니다. 리소스 모니터의 디스크 탭을 사용하여 디스크에 너무 많이 액세스하는 항목을 확인하십시오.
btw, 느린 디스크 활동의 자주 간과되는 원인은 재 시도를 초래하는 디스크 오류 입니다. 이에 대한 이벤트 로그를 확인하십시오.
이 기사는 인터넷에서 수집됩니다. 재 인쇄 할 때 출처를 알려주십시오.
침해가 발생한 경우 연락 주시기 바랍니다[email protected] 삭제
몇 마디 만하겠습니다