인터넷에서 입력해야한다는 내용을 읽은 diskpart
다음 Windows를 설치할 디스크를 선택하고 command를 사용 clean
합니다. 하지만 그 명령은 내 모든 데이터를 지울 것이고, 그 데이터가 필요합니다. 내 문제를 설명하는 사진은 다음과 같습니다.
여기에서 필요한 데이터가있는 파티션과 창을 설치할 할당되지 않은 공간을 모두 볼 수 있습니다.
그리고 여기에 내가 입력 할 때 cmd에서 보는 diskpart
것은 두 파티션을 하나로 병합하므로 사용할 수 없습니다clean
또한 할당되지 않은 공간의 새 파티션을 만들려고하면 오류가 발생합니다.
Windows는 부팅 모드와 파티션 테이블 유형을 매우 유연하게 연결합니다.
Your disk is a GPT disk, and the message you're seeing indicates that you've booted the installer in BIOS/CSM/legacy mode (or on a BIOS-only computer); it's complaining about the mismatch. Note that GPT and MBR are both partition table types. As such, they apply to the entire disk; you can't convert just one partition from GPT to MBR or vice-versa. (Well, aside from hybrid MBRs, but that topic is irrelevant here.) Broadly speaking, there are two solutions:
gdisk
) can do this. So can some Windows-specific tools that may be easier to use, but I'm afraid I'm not familiar with them and so I can't provide any pointers. Beware, though: Some tools, including the standard Microsoft tools, can convert from GPT to MBR or vice-versa only by wiping out your existing partitions! If you convert your disk, you can boot the installer just as you did before and you should be able to install. One caveat: Although a lossless conversion from GPT to MBR is theoretically possible, program bugs, power losses at inopportune times, user error, and other things can wipe out your partition table when you work at this low level. Thus, the risk is not 0, and you should back up your important data before you try this.Which approach to take depends on details you've not presented, such as:
이 기사는 인터넷에서 수집됩니다. 재 인쇄 할 때 출처를 알려주십시오.
침해가 발생한 경우 연락 주시기 바랍니다[email protected] 삭제
몇 마디 만하겠습니다