About a week ago I got Machine check exception when I was starting my Windows 10 machine (HPE-420cs), the progress remained stuck at 0% for several hours and no error code was provided.
After waiting cca 3hrs I restarted PC using hardware button, since the PC didn't respond to any other way of commanding it. The error appeared again and the progress, again, remained stuck at 0%.
Next I booted to the recovery mode only to find out that none of the recovery points work, the automatic repair also didn't help and so I had to perform system reset.
모든 파일과 설정을 유지하면서 창을 다시 설치하고 모든 것이 정상으로 돌아갔습니다. 하드 드라이브와 메모리에 오류가 있는지 확인하고 검색 기능이 Star 메뉴의 아이콘을 무시한 것을 제외하고는 모든 테스트를 문제없이 통과했습니다. Cortana를 다시 설치하고 인덱싱 옵션을 확인하고 관련 레지스트리 항목을 삭제하고 결과가없는 인덱스를 다시 작성했기 때문에 그다지 문제가되지 않았기 때문에 보도록하기로 결정했습니다.
오늘 오류가 반환 될 때만 PC를 다시 사용하기 시작했으며 공장 초기화 옵션 만 문제를 해결하고 Windows에 들어갈 수있게했습니다.
그 이후로 UBCD에서 테스트를 진행해 왔는데 memtest 및 CPU 스트레스 테스트가 모두 명확하게 나왔습니다. 지금은 하드 드라이브를 다시 테스트하고 있지만 지금까지 오류가 발견되지 않았으며 오류가 없을 것 같습니다.
I don't really now where to go from here, the hardware seems to be ok. The windows is, more or less, cleanly installed and looking for help online turned out nothing. And since Windows does not display detailed error message I am left with guess work.
Is there any way to resolve this issue or at least find out what exactly is wrong with my PC?
Machine Check Exceptions are generally caused by the CPU raising a signal that tells the OS that a hardware fault has occurred. Your operating system is almost never at fault. This can be caused by a number of things:
Failing that, if you can, please upload the crash dump somewhere and reply with a link and I'll try to analyze it for you.
이 기사는 인터넷에서 수집됩니다. 재 인쇄 할 때 출처를 알려주십시오.
침해가 발생한 경우 연락 주시기 바랍니다[email protected] 삭제
몇 마디 만하겠습니다