HP EliteBook 랩톱에서 Windows 7과 함께 Ubuntu 12.04 (21.04.12의 Daily-Live iso)를 설치했습니다.
하드 디스크 (/ dev / sda) 대신 USB 디스크 (/ dev / sdb)에 grub을 설치 한 것을 제외하고는 설치가 잘되었습니다. grub이 설치된 USB 디스크를 사용하여 Ubuntu 설치로 부팅 할 수있었습니다. 그런 다음 "grub-install / dev / sda"를 실행하여 하드 디스크 (/ dev / sda)에 수동으로 grub을 설치했습니다.
그런 다음 Grub 메뉴에서 Ubuntu 또는 Windows 7을 예약 할 수 있습니다. 그러나 Windows 7로 부팅 한 후에는 다음 부팅시 grub이로드되지 않습니다. 컴퓨터는 오류없이 계속해서 재부팅됩니다. 화면이 검게 변하고 재부팅됩니다. grub에는 / dev / sda1 및 / dev / sda3의 두 가지 Windows 7 항목이 있습니다. 이는 실제로 두 파티션을 모두 사용하는 단일 Windows 설치입니다. 둘 중 하나로 부팅하면 동일한 효과가 생성됩니다.
USB 디스크를 사용하여 Ubuntu 파티션으로 부팅하면 부팅 복구 응용 프로그램을 사용하여 GRUB을 작동 순서로 복원 할 수 있음을 발견했습니다. 그런 다음 Windows로 다시 부팅하면 grub이 다시 중단됩니다.
boot-repair가 생성하는 로그 파일의 전체 세부 정보는 여기에서 파티션 세부 정보를 보여줍니다. http://paste.ubuntu.com/940155/
어떤 아이디어?
이것은 정말로 " 답변 " 이 아닙니다 . 내용이 댓글과 더 잘 일치하지만 너무 길어서 하나에 맞지 않습니다. 사과 :-(
질문을 올바르게 읽고 있는지 확인하기위한 몇 가지 질문입니다. (추가 정보가 있으면 질문을 업데이트 / 수정하십시오.)
sda5
하고 성공적으로 실행 sudo grub-install /dev/sda
했습니까?/dev/sda1
(레이블 "OSDisk")이고 다른 하나는 /dev/sda3
(레이블 "BDEDrive")입니다.두 Windows 부팅 구성간에 충돌이 있는지 궁금합니다. 그들 중 하나만 필요한 것 같습니다. (아마 첫 번째 파티션에있는 것, OSBoot?)
EasyBCD 와 같은 Windows 부팅 유틸리티를 설치하고 Windows 부팅 설정이 올바른지 확인하여 무언가를 배울 수 있습니까?
또 다른 대안은 윈도우 7 불러올 수 있습니다 고급 시작 옵션을 눌러 메뉴 부팅을 F8 즉시 GRUB 메뉴에서 Windows 부팅을 시작한 후. Repair your computer
고급 옵션 부팅 메뉴에서 옵션을 사용할 수있는 경우 실행 Startup repair
하여 Windows 부팅 설정의 문제를 확인하고 (아마도) 수정할 수 있습니다.
참고 : 빨리 눌러야합니다. F8그렇지 않으면 Windows가 평소대로 부팅됩니다.
정확히 무엇이 잘못되었는지 확실하지 않지만 Windows 또는 Linux 파일 시스템에 손상이있을 수 있습니까?
아래 발췌 한 내용은 616 행에서 641 행까지의 부팅 복구 로그에서 발췌 한 것입니다. getcwd()
(현재 작업 디렉토리 가져 오기) 의 반복적 인 실패 와 ZISD (ZENworks Image Safe Data?)에 대한 GRUB 경고는 의미가있을 수 있습니다. ZENworks를 사용하십니까?
REPAIROK:
Copied Win boot files from sda3 to sda1
Reinstall the GRUB of sda5 into all MBRs of disks with OS or not-USB
Reinstall the GRUB of sda5 into the MBR of sda
dpkg --configure -a sda5
sh: 0: getcwd() failed: No such file or directory
grub-install (GRUB) 1.99-21ubuntu3
grub-setup: warn: Sector 5 is already in use by ZISD; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.
SETUPOUTPUT: SETUPEXIT:0
sh: 0: getcwd() failed: No such file or directory
/usr/sbin/grub-setup: warn: Sector 5 is already in use by ZISD; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.
INSTALLOUTPUT: Installation finished. No error reported.
INSTALLEXIT:0
sh: 0: getcwd() failed: No such file or directory
sh: 0: getcwd() failed: No such file or directory
Generating grub.cfg ...
sh: 0: getcwd() failed: No such file or directory
sh: 0: getcwd() failed: No such file or directory
sh: 0: getcwd() failed: No such file or directory
Found linux image: /boot/vmlinuz-3.2.0-23-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-23-generic-pae
sh: 0: getcwd() failed: No such file or directory
sh: 0: getcwd() failed: No such file or directory
Found memtest86+ image: /boot/memtest86+.bin
sh: 0: getcwd() failed: No such file or directory
sh: 0: getcwd() failed: No such file or directory
이 기사는 인터넷에서 수집됩니다. 재 인쇄 할 때 출처를 알려주십시오.
침해가 발생한 경우 연락 주시기 바랍니다[email protected] 삭제
몇 마디 만하겠습니다