kernel: EDAC MC0: UE page 0x0, offset 0x0, grain 0, row 7, labels ":": i3200 UE
All of a sudden today, our CentOS release 6.4 (Final) system started throwing EDAC errors. I rebooted, and the errors stopped.
I have been searching for answers, but they fall into two camps, memory or a chipset. I would like some advice on where to search further to narrow this down to chipset or memory.
What you're experiencing is an Error Detection and Correction event. Given the error includes this bit: MC0
you're experiencing a memory error. This message is telling you where specifically you're experiencing the error. MC0
means the RAM in the first socket (#0). The rest of that message is telling you specifically within that RAM DIMM the error occurred.
Given you're getting just one, I would continue to monitor it but do nothing for the time being. If it continues then you most likely are experiencing a failing memory module.
You could also try to test it more thoroughly using memtest86+.
This previous question titled: How to blacklist a correct bad RAM sector according to MemTest86+ error imdocation? will show you how to blacklist the memory if you're interested in that as well.
この記事はインターネットから収集されたものであり、転載の際にはソースを示してください。
侵害の場合は、連絡してください[email protected]
コメントを追加