I have issue with keypad click. They do not work properly as my wired mouse.
When I use xev to identify wich key is sent :
The synclient output :
$ synclient
Parameter settings:
LeftEdge = 47
RightEdge = 1152
TopEdge = 34
BottomEdge = 601
FingerLow = 25
FingerHigh = 30
MaxTapTime = 180
MaxTapMove = 59
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 282
EmulateTwoFingerMinW = 7
VertScrollDelta = 27
HorizScrollDelta = 27
VertEdgeScroll = 0
HorizEdgeScroll = 0
CornerCoasting = 0
VertTwoFingerScroll = 0
HorizTwoFingerScroll = 0
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.147493
TouchpadOff = 2
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 0
TapButton2 = 0
TapButton3 = 0
ClickFinger1 = 1
ClickFinger2 = 0
ClickFinger3 = 0
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 0
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 6
VertHysteresis = 6
ClickPad = 0
lspci:
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
Subsystem: Dell Sunrise Point-LP SMBus
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ef252000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i
xinput :
$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Dell Dell Wired Multimedia Keyboard id=11 [slave pointer (2)]
⎜ ↳ DELL0816:00 044E:121F Touchpad id=15 [slave pointer (2)]
⎜ ↳ Logitech USB Optical Mouse id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Dell Dell Wired Multimedia Keyboard id=10 [slave keyboard (3)]
↳ Dell Dell USB Entry Keyboard id=13 [slave keyboard (3)]
↳ Integrated_Webcam_HD id=14 [slave keyboard (3)]
↳ Intel HID events id=16 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=17 [slave keyboard (3)]
↳ Dell WMI hotkeys id=18 [slave keyboard (3)]
↳ Dell Dell Wired Multimedia Keyboard id=19 [slave keyboard (3)]
What I have tried before to force synaptic :
apt remove xserver-xorg-input-libinput
apt install xserver-xorg-input-synaptics
apt install xautomation
apt install xbindkeys
xinput --set-button-map 15 2 1 3
Or play with changing the order of 2 1 3 for your demand.
Note: reinstalling is never a solution.
Collected from the Internet
Please contact [email protected] to delete if infringement.
Comments