Network Destination Netmask Gateway Interface
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.8
127.0.0.0 255.0.0.0 On-link 127.0.0.1
127.0.0.1 255.255.255.255 On-link 127.0.0.1
127.255.255.255 255.255.255.255 On-link 127.0.0.1
192.168.2.0 255.255.255.0 On-link 192.168.2.8
192.168.2.8 255.255.255.255 On-link 192.168.2.8
192.168.2.255 255.255.255.255 On-link 192.168.2.8
224.0.0.0 240.0.0.0 On-link 127.0.0.1
224.0.0.0 240.0.0.0 On-link 192.168.2.8
255.255.255.255 255.255.255.255 On-link 127.0.0.1
255.255.255.255 255.255.255.255 On-link 192.168.2.8
Based on the routing table information above, what IP address would traffic destined for an external network be sent to, and what interface device?
IP Address of next node:
Interface device:
The destination 0.0.0.0 with mask 0.0.0.0 matches any address. The gateway mentioned next to it, 192.168.2.1, is thus the default gateway. Your interface connected to this gateway has address 192.168.2.8, but the routing table does not specify whether this is an ethernet or wireless interface. Other possibilities (like a VPN) are inconsistent with the table.
Collected from the Internet
Please contact [email protected] to delete if infringement.
Comments