因此,我一直是Windows用户,也是Windows的忠实拥boy。(享受PC游戏)。最近,我一直在尝试Linux,Ubuntu和Kubuntu。我必须说,我真的很感动-我真的很喜欢。
我有很多问题。我的CPU使用率一直很高。大约10%至20%的人不使用计算机,而仅显示桌面。在观看youtube视频时,通常占70-80%。我也经常遇到系统错误。
我的规格如下:英特尔i5 3570华硕GTX 670 8 GB金士顿RAM 500 GB HDD双启动与Windows 7。
它是Ubuntu 13.10的全新安装。
注意:这可能不是您要找的答案,但可能很有用。
闪存将很难在您的CPU上使用,但是i5的80%是……很多。我之前注意到,Chrome内置的Flash使用的CPU比flash-plugin
Firefox中的外部CPU使用的CPU多。但是20%的用户在看台式机时,看起来似乎太多了。
例如,对于我的AMD AthlonII X4 3.0Ghz,我使用每个完整内核的2-20%,使用完整的加速1080p桌面,firefox运行,终端和鼠标/键盘活动。所有这些,同时看着top
和gnome-system-monitor
,它们本身就很沉重。
如果我的CPU加载好吗?
不特别。我曾经听说过,与其他操作系统相比,Linux被设计为使用我们硬件中的最佳硬件。这意味着如果您拥有更好的硬件,它会更重。
如storm09f87a所说:“未使用的CPU周期浪费了CPU周期”。从根本上讲是正确的。记住这一点
当我的CPU活动过高时该怎么办?
您可以top
使用CLI命令(命令行界面)来查看您的CPU活动。
您还可以gnome-system-monitor
通过GUI(图形用户界面)使用来查看(全部和详细信息)
例如,我将两者结合使用:
您可以在此屏幕快照上看到
Xorg
花费很多的时间。但是实际上,这是由于鼠标活动而不是显示器本身。您还会看到的内容gnome-system-monitor
很繁重:但是您可以忽略它,因为该程序并不总是在运行。
关键是要查看哪个进程占用您的CPU周期。有时,您可能会注意到由于流程而导致的错误(泄漏),该流程不应使用太多的电源。
You can try then to kill it with the command killall nameoftheprocess
. If it was necessary for the OS to run, then either it will restart itself, or you'll have to reboot.
You can also seek what program/service is related to this process and reinstall, optimise, or restart it. You can fill a bug report if needed.
You can, if you wish, use a tool designed to make Linux more eco-friendly on a desktop PC, and save energy on a laptop.
I never tried it on a desktop PC, but from what I've heard, it helps to reduce the temperature of your system and better regulate the hardware. That tool is TLP
by Linrunner.
" TLP brings you the benefits of advanced power management for Linux without the need to understand every technical detail. TLP comes with a default configuration already optimized for battery life, so you may just install and forget it. Nevertheless TLP is highly customizable to fulfil your specific requirements."
You can install it with these command-lines :
sudo add-apt-repository -y ppa:linrunner/tlp
sudo apt-get update
sudo apt-get install tlp tlp-rdw
It will be used on next reboot. You can also manually start it with sudo tlp start
. You'll find the documentation on Linrunner's website.
I am experiencing system errors...
Me too, don't worry. Ubuntu has the filthy habit to report every little error, even when it shouldn't (in my opinion) be noticed to the user.
根据错误:如果是常规错误,它们是从哪里来的,如果它们使系统正常工作,则...您可以停用“错误”消息。我总是这样做,因为这确实是键盘上的痛苦。
要停用每个错误的通知,请使用以下命令行:
sudo sed -i 's/enabled=1/enabled=0/g' /etc/default/apport
(或传递enabled=1
到enable=0
/ etc / default / apport文件中)。
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句