搜索
搜索

第一次流浪失败

Doug Morin 发表于 Dev
22
道格·莫林

我试图启动并运行vvv以便在wordpress网站上工作，并且在遵循“ First Vagrant Up”说明后，我的安装失败。您可以在下面找到终端输出。

只是要注意，vagrant up下面的命令以sudo运行，但是如果不运行它，我会得到相同的结果。

https://github.com/Varying-Vagrant-Vagrants/VVV/tree/master#the-first-vagrant-up

我的安装在步骤8失败

doug@UNEMAC06261 vagrant-local$ sudo vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'ubuntu/trusty64'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'ubuntu/trusty64' is up to date...
==> default: Setting the name of the VM: vagrant-local_default_1411438722704_61758
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: hostonly
==> default: Forwarding ports...
    default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Connection timeout. Retrying...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Checking for host entries
==> default: adding to (/etc/hosts) : 192.168.50.4  vvv  # VAGRANT: 5060d38a36f5e1f12d46263feb41f99a (default) / 502bc2fa-8395-48b4-a09c-09aa74586389
==> default: adding to (/etc/hosts) : 192.168.50.4  vvv.dev  # VAGRANT: 5060d38a36f5e1f12d46263feb41f99a (default) / 502bc2fa-8395-48b4-a09c-09aa74586389
==> default: adding to (/etc/hosts) : 192.168.50.4  local.wordpress.dev  # VAGRANT: 5060d38a36f5e1f12d46263feb41f99a (default) / 502bc2fa-8395-48b4-a09c-09aa74586389
==> default: adding to (/etc/hosts) : 192.168.50.4  local.wordpress-trunk.dev  # VAGRANT: 5060d38a36f5e1f12d46263feb41f99a (default) / 502bc2fa-8395-48b4-a09c-09aa74586389
==> default: adding to (/etc/hosts) : 192.168.50.4  src.wordpress-develop.dev  # VAGRANT: 5060d38a36f5e1f12d46263feb41f99a (default) / 502bc2fa-8395-48b4-a09c-09aa74586389
==> default: adding to (/etc/hosts) : 192.168.50.4  build.wordpress-develop.dev  # VAGRANT: 5060d38a36f5e1f12d46263feb41f99a (default) / 502bc2fa-8395-48b4-a09c-09aa74586389
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => /Users/doug/WebsitesNoMamp/vagrant-local
    default: /srv/www => /Users/doug/WebsitesNoMamp/vagrant-local/www
    default: /srv/log => /Users/doug/WebsitesNoMamp/vagrant-local/log
    default: /srv/config => /Users/doug/WebsitesNoMamp/vagrant-local/config
    default: /srv/database => /Users/doug/WebsitesNoMamp/vagrant-local/database
==> default: Running provisioner: shell...
    default: Running: /tmp/vagrant-shell20140922-5634-vig5ba.sh
==> default: stdin: is not a tty
==> default: Check for apt packages to install...
==> default:  * php5-fpm [not installed]
==> default:  * php5-cli [not installed]
==> default:  * php5-common [not installed]
==> default:  * php5-dev [not installed]
==> default:  * php5-memcache [not installed]
==> default:  * php5-imagick [not installed]
==> default:  * php5-mcrypt [not installed]
==> default:  * php5-mysql [not installed]
==> default:  * php5-imap [not installed]
==> default:  * php5-curl [not installed]
==> default:  * php-pear [not installed]
==> default:  * php5-gd [not installed]
==> default:  * nginx [not installed]
==> default:  * memcached [not installed]
==> default:  * mysql-server [not installed]
==> default:  * imagemagick [not installed]
==> default:  * subversion [not installed]
==> default:  * git-core [not installed]
==> default:  * zip [not installed]
==> default:  * unzip [not installed]
==> default:  * ngrep [not installed]
==> default:  * curl                                                7.35.0-1ubuntu2.1
==> default:  * make                                                3.81-8.2ubuntu3
==> default:  * vim                                                 2:7.4.052-1ubuntu3
==> default:  * colordiff [not installed]
==> default:  * postfix [not installed]
==> default:  * gettext [not installed]
==> default:  * graphviz [not installed]
==> default:  * dos2unix [not installed]
==> default:  * g++ [not installed]
==> default:  * nodejs [not installed]
==> default: Linked custom apt sources
==> default: No network connection available, skipping package installation
==> default: Generate Nginx server private key...
==> default: /etc/nginx/server.key: No such file or directory 140344758421152:error:02001002:system library:fopen:No such file or directory:bss_file.c:398:fopen('/etc/nginx/server.key','w') 140344758421152:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400:
==> default: Generate Certificate Signing Request (CSR)...
==> default: Error opening Private Key /etc/nginx/server.key
==> default: 140567930091168:error:02001002:system library:fopen:No such file or directory:bss_file.c:398:fopen('/etc/nginx/server.key','r')
==> default: 140567930091168:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400:
==> default: unable to load Private Key
==> default: Sign the certificate using the above private key and CSR...
==> default: /etc/nginx/server.csr: No such file or directory
==> default: Setup configuration files...
==> default:  * /srv/config/init/vvv-start.conf               -> /etc/init/vvv-start.conf
==> default: cp: 
==> default: cannot create regular file '/etc/nginx/nginx.conf'
==> default: : No such file or directory
==> default: cp: 
==> default: cannot create regular file '/etc/nginx/nginx-wp-common.conf'
==> default: : No such file or directory
==> default: mkdir: 
==> default: cannot create directory '/etc/nginx/custom-sites/'
==> default: : No such file or directory
==> default: sending incremental file list
==> default: rsync: mkdir "/etc/nginx/custom-sites" failed: No such file or directory (2)
==> default: rsync error: error in file IO (code 11) at main.c(674) [Receiver=3.1.0]
==> default:  * /srv/config/nginx-config/nginx.conf           -> /etc/nginx/nginx.conf
==> default:  * /srv/config/nginx-config/nginx-wp-common.conf -> /etc/nginx/nginx-wp-common.conf
==> default:  * /srv/config/nginx-config/sites/               -> /etc/nginx/custom-sites
==> default: cp: 
==> default: cannot create regular file '/etc/php5/fpm/php5-fpm.conf'
==> default: : No such file or directory
==> default: cp: 
==> default: cannot create regular file '/etc/php5/fpm/pool.d/www.conf'
==> default: : No such file or directory
==> default: cp: 
==> default: cannot create regular file '/etc/php5/fpm/conf.d/php-custom.ini'
==> default: : No such file or directory
==> default: cp: 
==> default: cannot create regular file '/etc/php5/fpm/conf.d/opcache.ini'
==> default: : No such file or directory
==> default: cp: 
==> default: cannot create regular file '/etc/php5/mods-available/xdebug.ini'
==> default: : No such file or directory
==> default: sed: can't read /etc/php5/mods-available/xdebug.ini: No such file or directory
==> default:  * /srv/config/php5-fpm-config/php5-fpm.conf     -> /etc/php5/fpm/php5-fpm.conf
==> default:  * /srv/config/php5-fpm-config/www.conf          -> /etc/php5/fpm/pool.d/www.conf
==> default:  * /srv/config/php5-fpm-config/php-custom.ini    -> /etc/php5/fpm/conf.d/php-custom.ini
==> default:  * /srv/config/php5-fpm-config/opcache.ini       -> /etc/php5/fpm/conf.d/opcache.ini
==> default:  * /srv/config/php5-fpm-config/xdebug.ini        -> /etc/php5/mods-available/xdebug.ini
==> default:  * /srv/config/memcached-config/memcached.conf   -> /etc/memcached.conf
==> default: sending incremental file list
==> default: db_backup
==> default: develop_git
==> default: makepot
==> default: vagrant_destroy
==> default: vagrant_halt
==> default: vagrant_suspend
==> default: xdebug_off
==> default: xdebug_on
==> default: sent 2.22K bytes  received 168 bytes  4.78K bytes/sec
==> default: total size is 3.00K  speedup is 1.25
==> default:  * /srv/config/bash_profile                      -> /home/vagrant/.bash_profile
==> default:  * /srv/config/bash_aliases                      -> /home/vagrant/.bash_aliases
==> default:  * /srv/config/vimrc                             -> /home/vagrant/.vimrc
==> default:  * /srv/config/subversion-servers                -> /home/vagrant/.subversion/servers
==> default:  * /srv/config/homebin                           -> /home/vagrant/bin
==> default: Restart services...
==> default: nginx: unrecognized service
==> default: memcached: unrecognized service
==> default: /tmp/vagrant-shell: line 318: php5dismod: command not found
==> default: php5-fpm: unrecognized service
==> default: mysql: unrecognized service
==> default: Setup MySQL configuration file links...
==> default: cp: 
==> default: cannot create regular file '/etc/mysql/my.cnf'
==> default: : No such file or directory
==> default:  * /srv/config/mysql-config/my.cnf               -> /etc/mysql/my.cnf
==> default:  * /srv/config/mysql-config/root-my.cnf          -> /home/vagrant/.my.cnf
==> default: service mysql restart
==> default: mysql: unrecognized service
==> default: No custom MySQL scripting found in database/init-custom.sql, skipping...
==> default: /tmp/vagrant-shell: line 357: mysql: command not found
==> default: Initial MySQL prep...
==> default: Start MySQL Database Import
==> default: No custom databases to import
==> default: No network available, skipping network installations
==> default: find: 
==> default: `/etc/nginx/custom-sites'
==> default: : No such file or directory
==> default: Restart Nginx...
==> default: nginx: unrecognized service
==> default: Cleaning the virtual machine's /etc/hosts file...
==> default: Adding domains to the virtual machine's /etc/hosts file...
==> default:  * Added vvv.dev from /srv/www/vvv-hosts
==> default:  * Added local.wordpress.dev from /srv/www/vvv-hosts
==> default:  * Added local.wordpress-trunk.dev from /srv/www/vvv-hosts
==> default:  * Added src.wordpress-develop.dev from /srv/www/vvv-hosts
==> default:  * Added build.wordpress-develop.dev from /srv/www/vvv-hosts
==> default: -----------------------------
==> default: Provisioning complete in 32 seconds
==> default: No external network available. Package installation and maintenance skipped.
==> default: For further setup instructions, visit http://vvv.dev
==> default: Running provisioner: shell...
    default: Running: inline script
==> default: stdin: is not a tty
==> default: mysql: unrecognized service
The SSH command responded with a non-zero exit status. Vagrant
assumes that this means the command failed. The output for this command
should be in the log above. Please read the output to determine what
went wrong.

更新：

事实证明，由于某种原因，解决甚至无法连接到VM的唯一方法是使用以下命令手动ssh进入服务器vagrant ssh并手动安装它说缺少的软件命令（在这种情况下）：

sudo apt-get install php5-fpm
sudo apt-get install php5-cli
sudo apt-get install php5-common
sudo apt-get install php5-dev
sudo apt-get install php5-memcache
sudo apt-get install php5-imagick
sudo apt-get install php5-mcrypt
sudo apt-get install php5-mysql
sudo apt-get install php5-imap
sudo apt-get install php5-curl
sudo apt-get install php-pear
sudo apt-get install php5-gd
sudo apt-get install nginx
sudo apt-get install memcached
sudo apt-get install mysql-server
sudo apt-get install imagemagick
sudo apt-get install subversion
sudo apt-get install git-core
sudo apt-get install zip
sudo apt-get install unzip
sudo apt-get install ngrep
sudo apt-get install colordiff
sudo apt-get install postfix
sudo apt-get install gettext
sudo apt-get install graphviz
sudo apt-get install dos2unix
sudo apt-get install g++
sudo apt-get install nodejs

这不能解决实际上能够在VM上查看我的站点的问题。即使现在已经安装了所有程序，但我仍然无法查看实际站点，在我看来，该站点似乎未正确配置VM，并且运行时该配置应该自动进行vagrant up，对吗？

道格·莫林

事实证明，我之所以无法通过无业游民的人完全安装VM是因为设置失败。在供应过程中，它将检查是否可以ping到某个IP地址（在本例中为8.8.4.4）。在正常的网络上它应该可以工作，但是在矿井ping上是禁用的，因此即使存在网络连接，这也会为ping结果返回假阴性。

要为我解决此问题，我必须更改检查ping的if语句。

if [[ $ping_result == *bytes?from* ]]; then

变成

if [[ 1==1 ]]; then

在第136行https://github.com/Varying-Vagrant-Vagrants/VVV/blob/master/provision/provision.sh#L136

和第614行https://github.com/Varying-Vagrant-Vagrants/VVV/blob/master/provision/provision.sh#L614

这不是永久性修复，但在这种情况下对我有用。

本文收集自互联网，转载请注明来源。

如有侵权，请联系[email protected] 删除。

编辑于
0

我来说两句

0条评论
登录后参与评论

相关文章

来自分类Dev

Android WebView仅在第一次失败

来自分类Dev

测试什么时候第一次失败？

来自分类Dev

sorted() 仅在第一次调用时失败

来自分类Dev

在第一次流浪汉期间如何配置个人数据库？

来自分类Dev

第一次接触被忽略？

来自分类Dev

第一次击球太快

来自分类Dev

第一次通过成语

来自分类Dev

广度第一次迭代？

来自分类Dev

第一次安装Ubuntu

来自分类Dev

第一次链接功能

来自分类Dev

第一次运行jstree

来自分类Dev

广度第一次迭代？

来自分类Dev

动画是第一次

来自分类Dev

第一次接触被忽略？

来自分类Dev

HTTPAsyncClient第一次跳过

来自分类Dev

第一次使用Mockito

来自分类Dev

摩卡第一次测试

来自分类Dev

第一次加载页面

来自分类Dev

第一次击球太快

来自分类Dev

组件的第一次更新

来自分类Dev

Laravel - 第一次使用

来自分类Dev

第一次安装 Ubuntu

来自分类Dev

twitter小部件仅在第一次加载时有效，然后失败

来自分类Dev

Spring Cloud Hystrix在第一次命令调用时失败

来自分类Dev

重新尝试分配内存是否会在第一次失败？

来自分类Dev

第一次失败后如何停止async.queue？

来自分类Dev

第一次更新后AngularJS $ watch数组失败

来自分类Dev

在第一次期望失败后停止茉莉花测试

来自分类Dev

link_to ...远程：true，方法：发布总是在第一次尝试时失败

Related 相关文章

  1. 1

    Android WebView仅在第一次失败

  2. 2

    测试什么时候第一次失败？

  3. 3

    sorted() 仅在第一次调用时失败

  4. 4

    在第一次流浪汉期间如何配置个人数据库？

  5. 5

    第一次接触被忽略？

  6. 6

    第一次击球太快

  7. 7

    第一次通过成语

  8. 8

    广度第一次迭代？

  9. 9

    第一次安装Ubuntu

  10. 10

    第一次链接功能

  11. 11

    第一次运行jstree

  12. 12

    广度第一次迭代？

  13. 13

    动画是第一次

  14. 14

    第一次接触被忽略？

  15. 15

    HTTPAsyncClient第一次跳过

  16. 16

    第一次使用Mockito

  17. 17

    摩卡第一次测试

  18. 18

    第一次加载页面

  19. 19

    第一次击球太快

  20. 20

    组件的第一次更新

  21. 21

    Laravel - 第一次使用

  22. 22

    第一次安装 Ubuntu

  23. 23

    twitter小部件仅在第一次加载时有效，然后失败

  24. 24

    Spring Cloud Hystrix在第一次命令调用时失败

  25. 25

    重新尝试分配内存是否会在第一次失败？

  26. 26

    第一次失败后如何停止async.queue？

  27. 27

    第一次更新后AngularJS $ watch数组失败

  28. 28

    在第一次期望失败后停止茉莉花测试

  29. 29

    link_to ...远程：true，方法：发布总是在第一次尝试时失败

热门标签

归档