我的电脑有两个驱动器...
...编织线B1来自主板,
然后似乎在第二个驱动器上有一个“跳线”B2。
然后,每个驱动器都有自己独立的普通扁平电缆 F1 和 F2。
事实上,我想简单地扔掉 blueplatter 驱动器(即,我希望机器只有一个驱动器,绿色的)。
简单地断开 B2 和 F2,扔掉蓝色驱动器是完全可以的吗?
那么,让“跳线”B2悬空就可以了?(它不需要,谁知道,终结者之类的?)
Feel free to file this under "questions from Mac idiots"; I have not seen such a "jumper" before on my limited time inside PCs. As you know on Macs there is, uh, less access to the drives :)
If you're coming from a Mac world, then you'll quickly find generic PCs are full of this kind of loose cabling. They have no real coherent design principal, because they have no coherent single design team. Learn to live with it ;)
B1 to B2 is a parallel power cable, coming from your computer's power supply. The power supply is capable of powering two (or more) devices from a single source.
Your house's mains wiring does just the same thing. A double socket on your living room wall works on exactly the same principal.
F1 和 F2 是不同的数据连接器。这些不能并行。每个都与主板上的一个单独插槽相结合,可以识别哪个插槽。
从单个驱动器断开任一电缆将阻止驱动器工作,同时不会对另一个驱动器或计算机造成任何损坏。如果您同时断开 B2 和 F2,那么您将移除 F2 的另一端以保持整洁。把它留在原地没有任何实际区别。B2 可以“悬垂”。
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句