我在安装任何程序时都遇到问题。我收到的错误Sub-process /usr/bin/dpkg returned an error code (1)。以下是的输出日志apt-get -f install。知道我的包裹管理员有什么问题吗？
tahir@tahir-Inspiron-1564:/var/www$ sudo apt-get -f install
[sudo] password for tahir:
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 24 not upgraded.
5 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up linux-image-2.6.35-27-generic (2.6.35-27.48) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.35-27-generic
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 2.6.35-27-generic /boot/vmlinuz-2.6.35-27-generic
* dkms: running auto installation service for kernel 2.6.35-27-generic
* bcmwl (5.60.48.36+bdcom)... [ OK ]
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-27-generic /boot/vmlinuz-2.6.35-27-generic
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.35-27-generic /boot/vmlinuz-2.6.35-27-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 2.6.35-27-generic /boot/vmlinuz-2.6.35-27-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 2.6.35-27-generic /boot/vmlinuz-2.6.35-27-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 2.6.35-27-generic /boot/vmlinuz-2.6.35-27-generic
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-30-generic
Found initrd image: /boot/initrd.img-2.6.35-30-generic
Found linux image: /boot/vmlinuz-2.6.35-28-generic
Found initrd image: /boot/initrd.img-2.6.35-28-generic
Found linux image: /boot/vmlinuz-2.6.35-27-generic
Found initrd image: /boot/initrd.img-2.6.35-27-generic
Found linux image: /boot/vmlinuz-2.6.35-25-generic
Found initrd image: /boot/initrd.img-2.6.35-25-generic
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
Found linux image: /boot/vmlinuz-2.6.32-28-generic
Found initrd image: /boot/initrd.img-2.6.32-28-generic
Found linux image: /boot/vmlinuz-2.6.32-27-generic
Found initrd image: /boot/initrd.img-2.6.32-27-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda2
/etc/grub.d/README: 2: All: not found
/etc/grub.d/README: 4: 00_*:: not found
/etc/grub.d/README: 5: 10_*:: not found
/etc/grub.d/README: 6: Syntax error: "(" unexpected
run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 2
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.35-27-generic.postinst line 1010.
dpkg: error processing linux-image-2.6.35-27-generic (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up linux-image-2.6.35-28-generic (2.6.35-28.50) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.35-28-generic
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 2.6.35-28-generic /boot/vmlinuz-2.6.35-28-generic
* dkms: running auto installation service for kernel 2.6.35-28-generic
* bcmwl (5.60.48.36+bdcom)... [ OK ]
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-28-generic /boot/vmlinuz-2.6.35-28-generic
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.35-28-generic /boot/vmlinuz-2.6.35-28-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 2.6.35-28-generic /boot/vmlinuz-2.6.35-28-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 2.6.35-28-generic /boot/vmlinuz-2.6.35-28-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 2.6.35-28-generic /boot/vmlinuz-2.6.35-28-generic
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-30-generic
Found initrd image: /boot/initrd.img-2.6.35-30-generic
Found linux image: /boot/vmlinuz-2.6.35-28-generic
Found initrd image: /boot/initrd.img-2.6.35-28-generic
Found linux image: /boot/vmlinuz-2.6.35-27-generic
Found initrd image: /boot/initrd.img-2.6.35-27-generic
Found linux image: /boot/vmlinuz-2.6.35-25-generic
Found initrd image: /boot/initrd.img-2.6.35-25-generic
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
Found linux image: /boot/vmlinuz-2.6.32-28-generic
Found initrd image: /boot/initrd.img-2.6.32-28-generic
Found linux image: /boot/vmlinuz-2.6.32-27-generic
Found initrd image: /boot/initrd.img-2.6.32-27-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda2
/etc/grub.d/README: 2: All: not found
/etc/grub.d/README: 4: 00_*:: not found
/etc/grub.d/README: 5: 10_*:: not found
/etc/grub.d/README: 6: Syntax error: "(" unexpected
run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 2
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.35-28-generic.postinst line 1010.
dpkg: error processing linux-image-2.6.35-28-generic (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up linux-image-2.6.35-30-generic (2.6.35-30.59) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.35-30-generic
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 2.6.35-30-generic /boot/vmlinuz-2.6.35-30-generic
* dkms: running auto installation service for kernel 2.6.35-30-generic
* bcmwl (5.60.48.36+bdcom)... [ OK ]
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-30-generic /boot/vmlinuz-2.6.35-30-generic
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.35-30-generic /boot/vmlinuz-2.6.35-30-generic
run-parts: executing /etc/kernel/postinst.d/pm-utils 2.6.35-30-generic /boot/vmlinuz-2.6.35-30-generic
run-parts: executing /etc/kernel/postinst.d/update-notifier 2.6.35-30-generic /boot/vmlinuz-2.6.35-30-generic
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 2.6.35-30-generic /boot/vmlinuz-2.6.35-30-generic
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-30-generic
Found initrd image: /boot/initrd.img-2.6.35-30-generic
Found linux image: /boot/vmlinuz-2.6.35-28-generic
Found initrd image: /boot/initrd.img-2.6.35-28-generic
Found linux image: /boot/vmlinuz-2.6.35-27-generic
Found initrd image: /boot/initrd.img-2.6.35-27-generic
Found linux image: /boot/vmlinuz-2.6.35-25-generic
Found initrd image: /boot/initrd.img-2.6.35-25-generic
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
Found linux image: /boot/vmlinuz-2.6.32-28-generic
Found initrd image: /boot/initrd.img-2.6.32-28-generic
Found linux image: /boot/vmlinuz-2.6.32-27-generic
Found initrd image: /boot/initrd.img-2.6.32-27-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda2
/etc/grub.d/README: 2: All: not found
/etc/grub.d/README: 4: 00_*:: not found
/etc/grub.d/README: 5: 10_*:: not found
/etc/grub.d/README: 6: Syntax error: "(" unexpected
run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 2
Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-2.6.35-30-generic.postinst line 1010.
dpkg: error processing linux-image-2.6.35-30-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.35-30-generic; however:
Package linux-image-2.6.35-30-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.35.30.38); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--confNo apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
igure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.35-27-generic
linux-image-2.6.35-28-generic
linux-image-2.6.35-30-generic
linux-image-generic
linux-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
**
**
以下是的输出sudo update-grub
tahir@tahir-Inspiron-1564:~$ sudo update-g
update-gconf-defaults update-grub2
update-grub update-gsfontmap
tahir@tahir-Inspiron-1564:~$ sudo update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-30-generic
Found initrd image: /boot/initrd.img-2.6.35-30-generic
Found linux image: /boot/vmlinuz-2.6.35-28-generic
Found initrd image: /boot/initrd.img-2.6.35-28-generic
Found linux image: /boot/vmlinuz-2.6.35-25-generic
Found initrd image: /boot/initrd.img-2.6.35-25-generic
Found linux image: /boot/vmlinuz-2.6.32-28-generic
Found initrd image: /boot/initrd.img-2.6.32-28-generic
Found linux image: /boot/vmlinuz-2.6.32-27-generic
Found initrd image: /boot/initrd.img-2.6.32-27-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
Found Windows 7 (loader) on /dev/sda2
/etc/grub.d/README: 2: All: not found
/etc/grub.d/README: 4: 00_*:: not found
/etc/grub.d/README: 5: 10_*:: not found
/etc/grub.d/README: 6: 20_*:: not found
/etc/grub.d/README: 8: The: not found
/etc/grub.d/README: 9: administrator.: not found
/etc/grub.d/README: 10: 01_otheros,: not found
/etc/grub.d/README: 11: the: not found
/etc/grub.d/README: 11: and: not found
文件/etc/grub.d/README如下所示。不知道为什么自述文件很重要。：-/
All executable files in this directory are processed in shell expansion order.
00_*: Reserved for 00_header.
10_*: Native boot entries.
20_*: Third party apps.
The number namespace in-between is configurable by system installer and/or
administrator. For example, you can add an entry to boot another OS as
01_otheros, 11_otheros, etc, depending on the position you want it to occupy in
the menu; and then adjust the default setting via /etc/default/grub.
文件：/ etc / default / grub：
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
文件：/ usr / share / grub / default / grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
您已经以某种方式赋予了README文件执行权限，并且update-grub脚本正在尝试执行它。因此，错误。
因此，删除执行权
sudo chmod -x /etc/grub.d/README
本文收集自互联网，转载请注明来源。
如有侵权，请联系[email protected] 删除。
我来说两句