I used wpa_passphrase, I had a plaintext password in before and it still wouldn't connect
For PEAP you really must use the password=
setting.
There is no PSK in WPA-Enterprise, and although the password may be hashed for MSCHAPv2, it would use a completely different hash than WPA-Personal PSKs do. Therefore wpa_passphrase
is useless here.
If it "still wouldn't connect" with a password, then it wouldn't connect for a different reason.
Are there any bonuses or drawbacks to NetworkManager over wpa_supplicant?
NetworkManager will just drive wpa_supplicant behind the scenes, and indeed all the parameters you find in the connection profile in /etc are very similar to raw wpa_supplicant config.
So in your case the advantage is just that you can copy/paste the config, not much more.
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句