我已经安装了linux（Ubuntu 14.04）和Windows 10。从Windows端将一个分区一分为二后，现在linux在引导时无法挂载这些分区。它显示以下错误消息。
disk drive for mnt/50FE*** is not ready yet or not present. continue to wait ...
it is possible to manually un-mount 50FE*** partition.
问题是编辑分区后50FE***，该分区不再可用。
现在我只想摆脱此错误消息。
任何帮助将不胜感激。谢谢
终于我找到了解决方案，
我已经手动编辑了FSTAB文件（etc / fstab）。FSTAB包含有关安装点的所有详细信息，包括引导中的自动安装驱动程序。因此删除与丢失的磁盘相对应的行
这是我的FSTAB文件
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=09642702-1d8e-41b8-897f-98079b8609e4 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda7 during installation
UUID=7554c61b-b8c9-45af-b5df-199670167a04 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=a54e0244-c77d-4672-9df9-2840924e0c94 none swap sw 0 0
/dev/disk/by-uuid/50FEFBC9FEFBA4FE /mnt/50FEFBC9FEFBA4FE auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Windows%2010 0 0
/dev/disk/by-uuid/3C7404F67404B4A5 /mnt/3C7404F67404B4A5 auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Data 0 0
/dev/disk/by-uuid/01D1953299EF8656 /mnt/01D1953299EF8656 auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Windows 0 0
就我而言，我已删除
/ dev / disk / by-uuid / 50FEFBC9FEFBA4FE / mnt / 50FEFBC9FEFBA4FE auto nosuid，nodev，nofail，x-gvfs-show，x-udisks-auth，x-gvfs-name = Windows％2010 0 0
希望这对某人有帮助
干杯！
本文收集自互联网，转载请注明来源。
如有侵权，请联系[email protected] 删除。
我来说两句