我正在将旧的1TB驱动器克隆到新的2TB驱动器。我已经成功地使用ddrescue
和SystemRescueCD克隆了它,现在可以在我的新2TB驱动器上启动到Windows了。但是,该驱动器现在具有一个1TB的分区和另一个TB的未分配空间。我正在尝试扩展该分区以填充驱动器。
首先,我尝试使用Windows 10的分区管理器,但是“扩展卷”选项显示为灰色,因为该卷是C驱动器。接下来,我尝试启动到旧的1TB驱动器上并在其中使用分区管理器,但是出现了蓝屏提示:“您的PC /设备需要维修”:
Nothing was wrong with this drive before, I just wanted to move to the bigger one. Not sure why this suddenly happened.
Anyway, third, I tried booting back into SystemRescueCD and using GParted, but it complains about bad sectors:
Its worth noting that the ddrescue
command reported 8 kB of lost data in the clone, which may explain the bad sectors. But I'm not sure.
I've tried running chkdsk /f
as suggested, but it made no difference.
So there's 3 questions here:
ddrescue
旧驱动器上遇到的坏扇区是否以某种方式被复制到新驱动器上?还是我只是从亚马逊那里得到了麻烦呢?可以对坏道进行“修复”,还是以某种方式将其忽略掉?ddrescue
是,它只是从中读取。chkdsk / B c:有必要重新测试坏扇区,以便在它们工作正常时可以将其清除。之后,Gparted应该可以正常工作
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句