TL; DR:使用“安装BCD”选项,USB驱动器变为“基本”,而不是“可移动”。
我有一个64gb Sandisk闪存驱动器,已满80%。我想从中安装Windows,但不想格式化它并丢失数据,所以我用谷歌搜索是否有这种可能性,并发表了一篇文章,说将.iso内容复制到闪存驱动器上,然后使用EasyBCD功能“安装BCD”以使其可启动。
I did this and clicked Yes in the dialog, but when booting from usb it gave an error. I decided to move the files to pc and then use Media Creation Tool to prepare the USB, but to my surprise it couldn't see the drive. I saw that it had changed from being "Removable" type to being "Basic",
so the windows doesn't see it as a flash drive anymore. I can read/write to it without a problem.
I reformatted, deleted partition and recreated it multiple times. I tried lexar bootit but I don't think it worked.
First, see a previous question on flipping the Removable Media Bit (RMB).
Windows OS Hub上对此过程有很好的描述。该站点还建议使用cfadisk.sys修改Windows查看驱动器的方式(如果无法翻转该位)。
有多种工具可以转换人民币来控制驱动器类型,例如一种可在Lexar闪存驱动器上使用的工具。另一个工具是用于Alcor或创见驱动器。
注意事项:请注意,bit-flip实用程序似乎特定于特定的USB闪存驱动器类型,而我没有找到专门用于Sandisk的实用程序。还要注意,一个实用程序在VirusTotal中显示为恶意软件-请务必检查所有下载。
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句