Ubuntu试图在重新启动之间记住触摸板的状态很有帮助...我讨厌它!
我的意思是,如果我在重新启动之前未启用触摸板,则在引导后默认情况下将启用物理开关以启用触摸板,但是软件开关会记住禁用状态-因此现在当我打开物理开关时,它将同时切换物理和软件状态(因此现在我已禁用身体并启用了软件)。
因此,基本上,如果我不插入外部鼠标,然后在设置对话框中手动选中复选框,则无法使用鼠标。
在某些先前的ubuntu版本中,可以将硬件触摸板开关与系统存储状态分离,因此我可以始终在系统中启用触摸板,但实际上要禁用它。但是我在16.04中找不到任何东西。
我发现的这个问题的所有解决方案都来自2014年或更早的版本...
在此先感谢您的帮助
编辑:xinput输出
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ RAPOO RAPOO 2.4G Wireless Device id=16 [slave pointer (2)]
⎜ ↳ ETPS/2 Elantech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ Sleep Button id=10 [slave keyboard (3)]
↳ BisonCam, NB Pro id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
↳ MSI WMI hotkeys id=14 [slave keyboard (3)]
↳ RAPOO RAPOO 2.4G Wireless Device id=15 [slave keyboard (3)]
编辑:xinput list-props 13输出
Device 'ETPS/2 Elantech Touchpad':
Device Enabled (139): 0
Coordinate Transformation Matrix (141): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (265): 1
Device Accel Constant Deceleration (266): 2.500000
Device Accel Adaptive Deceleration (267): 1.000000
Device Accel Velocity Scaling (268): 12.500000
Synaptics Edges (269): 94, 2262, 66, 1174
Synaptics Finger (270): 1, 1, 0
Synaptics Tap Time (271): 180
Synaptics Tap Move (272): 117
Synaptics Tap Durations (273): 180, 100, 100
Synaptics ClickPad (274): 0
Synaptics Middle Button Timeout (275): 75
Synaptics Two-Finger Pressure (276): 282
Synaptics Two-Finger Width (277): 7
Synaptics Scrolling Distance (278): 53, 53
Synaptics Edge Scrolling (279): 0, 0, 0
Synaptics Two-Finger Scrolling (280): 1, 1
Synaptics Move Speed (281): 1.000000, 1.750000, 0.075131, 0.000000
Synaptics Off (282): 2
Synaptics Locked Drags (283): 0
Synaptics Locked Drags Timeout (284): 5000
Synaptics Tap Action (285): 2, 3, 0, 0, 1, 3, 0
Synaptics Click Action (286): 1, 1, 0
Synaptics Circular Scrolling (287): 0
Synaptics Circular Scrolling Distance (288): 0.100000
Synaptics Circular Scrolling Trigger (289): 0
Synaptics Circular Pad (290): 0
Synaptics Palm Detection (291): 0
Synaptics Palm Dimensions (292): 10, 200
Synaptics Coasting Speed (293): 20.000000, 50.000000
Synaptics Pressure Motion (294): 30, 160
Synaptics Pressure Motion Factor (295): 1.000000, 1.000000
Synaptics Resolution Detect (296): 1
Synaptics Grab Event Device (297): 0
Synaptics Gestures (298): 1
Synaptics Capabilities (299): 1, 0, 1, 1, 1, 1, 1
Synaptics Pad Resolution (300): 31, 31
Synaptics Area (301): 0, 0, 0, 0
Synaptics Noise Cancellation (302): 13, 13
Device Product ID (260): 2, 14
Device Node (261): "/dev/input/event7"
这看起来像个xorg-synaptics
小故障。
解决它的一种方法是安装libinput
。它将取代synaptics
跑
sudo apt-get install xserver-xorg-input-libinput
然后重启。
您可以查看此问答以获取更多详细信息。
注意:您将无法使用GUI触摸板设置,因为带有unity DE的Ubuntu尚不完全支持libinput
。但是您可以使用CLI进行触摸板设置。
默认情况下,点击是禁用的libinput
。您可以启用它。
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句