我最近购买了新的SSD。我设置好了,现在我的旧硬盘就随处可见了。如果我可以在上面放文件(word文件等...不需要电源就可以运行),这样就可以清理(256GB小型)SSD上的空间,那将是很好的。
我像普通的硬盘一样插入它,而我的资源管理器看起来像这样:
我在任何地方都看不到。我只想清除/格式化旧驱动器就可以了,所以我可以访问它。
这是一个内部硬盘驱动器(我相信是SATA 3)。我尝试将其插入,就像普通的内部硬盘驱动器一样,只是没有出现。
这是一些图片。我在MSPaint中对其进行了编辑,如果您对此感到不满意,请对不起。
This is what it looks like when it's setup correctly. the blue cord used to be plugged into where the arrow is. Also (if you noticed), there's blue tape there because my case isn't small enough to securely hold the SSD in place. If that's a bad idea and I should do something else please tell me (without the tape it's dangled from the cords connecting it)
This is the The double connection cord
I mentioned in the comments. It's plugged into both harddrives, as you can see in the above image.
This is the blue cord that's plugged into the SSD. I put an arrow where it is plugged in normally.
I don't see it in disc management:
您的第一张照片仅显示了连接到SSD的SATA电缆。SATA电缆是蓝色的。您需要将适当的SATA电缆连接到HDD。希望您的主板有合适的第二个SATA连接器来支持HDD。当两个驱动器都通过SATA电缆连接到主板时,您应该能够访问两个驱动器。
可能还需要解决其他问题,例如驱动程序或BIOS设置。
本文收集自互联网,转载请注明来源。
如有侵权,请联系[email protected] 删除。
我来说两句